| M60 |
ASSORTED ACCYS & MAGAZINES |
COST / ITEM |
 |
U.S.G.I. M60 MACHINE GUN FOREARM ...
THIS IS VERY HARD TO COME BY VINTAGE ORIGINAL M60 FOREARM IN NEW CONDITION WITH PERFECT RUBBER COATING AND METAL FINISH....
A RARE PART TO GET AS A SPARE OR TO REFRESH THE LOOK OF YOUR MEGA DOLLAR M60 MACHINE GUN. |
$350 |
 |
M60-E4 PARTS SET... THIS IS A COMPLETE M6E4 PARTS SET.... THIS KIT CONTAINS THE E-4 BUTT STOCK WITH HOOP WIRE SHOULDER REST.... THE E4 M1913 PICATINNY RAILED TOP COVER WITH ENHANCED FEED MECHANISM, E4 FEED TRAY AND HANGER, DUAL NOTCH OP ROD, ENCAPTURED REAR NUT E-4 BOLT ASSEMBLY. WIDE M1913 RAILED FORWARD HEAT SHEILD WITH K GRIP, E-4 RINGED REAR SITE, E4 STANDARD BARREL WITH UN-PINNED DUCK BILL FLASH HIDER (RARE) TRIGGER GROUP WITH ATTACHMENT PINS AND SPRING PLATE, E4 BIPOD,
SLING HANGER, BARREL LATCH, CHANGING HANDLE AND PLATE WITH SCREW, RECOIL SPRING GUIDE ROD AND RECOIL SPRING, BUFFER AND YOKE.... EVERYTHING NEEDED TO UPDATE YOUR M60 TO THE NEWER M60-E4.... KIT CONDITION IS AS/NEW. |
$5,995 |
 |
| US ORDNANCE M60-E6 MACHINE GUN UPDATED / OPTIONAL/ PUSH BUTTON SAFETY TRIGGER GROUP... THIS IS A SELDOM AVAILABLE OPTIONAL M60-E6 TRIGGER GROUP FOR ANY M60 MACHINE GUN, USING THE NEWEST DESIGN GRIP, TRIGGER, PUSH BUTTON SAFETY AND MOUNTING PIN ASSEMBLY AS REQUIRED BY SOME SPECIAL OPERATIONAL CLIENTS.... A VERY RARE ACCESSORY |
|
EMAIL FOR PRICE
|
PHOTOS TO FOLLOW |
U.S.G.I. M60 MACHINE GUN FOREARM ....
THIS IS VERY HARD TO COME BY VINTAGE ORIGINAL M60 FOREARM IN NEW CONDITION WITH PERFECT RUBBER COATING AND METAL FINISH.....
A RARE PART TO GET AS A SPARE OR TO REFRESH THE LOOK OF YOUR BIG $$ M60 MACHINE GUN |
$350 |
 |
|
EMAIL FOR PRICE
|
 |
| M60 E-3/E-4/E-6 SEMI RIDGED AMMO BOX HOLDER ... THIS IS A SUPER COOL WEAPON ACCESSORY TO HOLD A 200 ROUND BELT OF 7.62 NATO AMMO FROM THE FEED TRAY HANGER OF YOUR M60-E TYPE WEAPONS SYSTEMS HANGER.... THE BOX WAS DESIGNED TO FIT ON THE MOUNTING TABS OF THE FEED TRAY HANGER AND SECURELY ATTACH THIS WATER RESISTANT POUCH WHICH WILL HOLD 200 ROUNDS OF 7.62 NATO LINKED AMMO EITHER LOOSE IN THE POUCH OR IN THE ORIGINAL U.S.G.I. WAXED CARDBOARD AMMO SHIPPINGS BOXES AS SHIPPED FROM THE GOVT AMMO CONTRACTOR ... SECURES TO THE FEED TRAY HANGER WITH A HEAVY MIL SPEC NYLON STRAP AND A VELCRO ATTACHING STRAP.... THE BOX IS MADE FROM A PLIABLE MIL SPEC HEAVY WATERPROOF CORDURA MATERIAL.... THIS BOX CAN ALSO BE RETRO FITTED FOR OTHER 7.62MM BELT FED GUNS IF THE USER IS INDUSTRIOUS AND SEES FIT TO DO SO.... A SELDOM AVAILABLE ITEM |
|
$165 |
 |
| M60 E-3/E-4/E-6 SEMI RIDGED AMMO BOX HOLDER ... THIS IS A SUPER COOL WEAPON ACCESSORY TO HOLD A 200 ROUND BELT OF 7.62 NATO AMMO FROM THE FEED TRAY HANGER OF YOUR M60-E TYPE WEAPONS SYSTEMS HANGER.... THE BOX WAS DESIGNED TO FIT ON THE MOUNTING TABS OF THE FEED TRAY HANGER AND SECURELY ATTACH THIS WATER RESISTANT POUCH WHICH WILL HOLD 200 ROUNDS OF 7.62 NATO LINKED AMMO EITHER LOOSE IN THE POUCH OR IN THE ORIGINAL U.S.G.I. WAXED CARDBOARD AMMO SHIPPINGS BOXES AS SHIPPED FROM THE GOVT AMMO CONTRACTOR ... SECURES TO THE FEED TRAY HANGER WITH A HEAVY MIL SPEC NYLON STRAP AND A VELCRO ATTACHING STRAP.... THE BOX IS MADE FROM A PLIABLE MIL SPEC HEAVY WATERPROOF CORDURA MATERIAL.... THIS BOX CAN ALSO BE RETRO FITTED FOR OTHER 7.62MM BELT FED GUNS IF THE USER IS INDUSTRIOUS AND SEES FIT TO DO SO.... A SELDOM AVAILABLE ITEM |
|
$165 |
 |
U.S.G.I. M60-E3/E4 (AND E6 ALSO) STANDARD LENGTH BARREL ASSEMBLY. ... THIS IS THE NEWEST CONFIGURATION OF THE STANDARD LENGHT E- SERIES BBL AS USED AND SUPPLIED WITH THE E-3 AND E-4 M60 MACHINE GUNS. .... THIS IS THE STANDARD LENGTH COMPLETE BBL ASSEMBLY SELDOM AVAILABLE NEW ON TODAYS MARKET.... THIS BBL IS COMPLETE AND NIW FROM THE FACTORY AND READY FOR USE AS IT IS ... THESE NEW BBLS FEATURE AN ADJUSTABLE FRONT SIGHT WHICH ALLOWS ZEROING OF THE FIREARM AND AN OFFSET BBL HANDLE PROVIDES A CLEAR SIGHT PICTURE... A HARD TO COME BY ITEM
| $2,895
|
 |
U.S.G.I. M60-6 (E3/E4 ALSO) LATEST COMMANDO BARREL ASSEMBLY. ... THIS IS THE NEWEST CONFIGURATION COMMANDO BBL AS USED AND SUPPLIED WITH THE LATEST E-6 M60 MACHINE GUNS. .... THIS IS A SHORTY COMMANDO BBL SELDOM AVAILABLE TO M60 OWNERS... THIS BBL IS EXC/LIKE NEW TEST FIRED FROM THE FACTORY AND IS COMPLETE AND READY FOR USE AS IT IS... THE SHORTY COMMANDO BARREL FEATURES THE LATEST GAS SYSTEM THAT HAS A SIMPLE AND EASY TO MAINTAIN GAS SYSTEM WITH REVERSIBLE GAS PISTON... ADJUSTABLE FRONT SIGHT ALLOWS ZEROING OF THE WEAPON AND OFFSET BBL HANDLE PROVIDES A CLEAR SIGHT PICTURE... A HARD TO COME BY ITEM... | $3,195
|
PHOTOS TO FOLLOW |
U.S.G.I. M60-6 (E3/E4 ALSO) LATEST COMMANDO BARREL ASSEMBLY. ... THIS IS IS THE NEWEST CONFIGURATION COMMANDO BBL AS USED AND SUPPLIED WITH THE LATEST E-6 M60 MACHINE GUNS. .... THIS IS A SHORTY COMMANDO BBL SELDOM AVAILABLE TO M60 OWNERS... THIS BBL IS NEW & UNFIRED.... COMPLETE AND READY TO INSTALL ON ANY M60 E3/E4/E6 MACHINE GUN.... THE SHORTY E6 COMMANDO BARREL FEATURES THE LATEST GAS SYSTEM THAT HAS A SIMPLE AND EASY TO MAINTAIN GAS SYSTEM WITH REVERSIBLE GAS PISTON... ADJUSTABLE FRONT SIGHT ALLOWS ZEROING OF THE WEAPON AND AN OFFSET BBL HANDLE PROVIDES A CLEAR SIGHT PICTURE... LATEST M60-E6/E3/E4 TYPE BBLS, BRAND NEW, ALMOST NEVER COME ALONG... |
$3,695
|
 |
M60-E6 CHARGING HANDLE.... THIS IS THE LATEST DESIGN (AND RARE TO FIND) CHARGING HANDLE SPECIALLY MADE FOR THE M60-E6 MODEL FIREARM.... LARGER RIBBED HANDLE MAKES FOR EASY GRIP WHEN COCKING THE GUN IN COLD OR WET CLIMATES AS WELL AS IN MUDDY CONDITIONS THAT COMMANDO OPERATORS MIGHT FIND THEMSELVES IN....
THIS CHARGER WILL FIT AND WORK FINE WITH ALL MODELS OF M60 TYPE MACHINE GUNS (M60/M60-E3/M60-E4/M60-E6) AND GIVE YOUR WEAPON A COOLER LOOK WHILE PROVIDING A MORE FIRM GRIP.
|
$495
|
 |
U.S.G.I. M60-E4/E3/E6 HEAVY STANDARD LENGTH SUSTAINED FIRE BARREL ... THIS IS A STANDARD LENGTH SUSTAINED FIRE HEAVY PROFILE M60 E-4/E-3/E6 FOR ANY OF THE E SERIES M60 TYPES.. THIS IS THE HEAVY WEIGHT M60 WHICH HAS ALMOST NEVER BEEN AVAILABLE TO M60 OWNERS IN ALL THESE YEARS AND THIS IS THE 2ND ONE WE HAVE HAD TO OFFER, IN ANY CONDITION.... THIS BBL IS NEW FROM THE FACTORY AND IS COMPLETE AND READY FOR USE ... THE HEAVY WEIGHT ALLOWS HEAVY OPERATIONAL SUPPRESSIVE FIRE FROM YOUR M60- E4/E3/E6 WEAPON SYSTEMS AND IS USED IN PLACE OF THE SHORTER COMMANDO BARRELS WHEN HEAVY COVER OR SUPPRESSIVE FIRE IS NEEDED..... AT HOME ON ANY M60E-TYPE INCLUDING INFANTRY USE, VEHICLE/AIRCRAFT/WATERCRAFT OF FIXED GROUND MACHINE GUN NEST..... THESE ORIGINAL HEAVY BBLS HAVE ALWAYS BEEN HARD TO COME BY AS MOST STANDARD M60-E4/E3/E6 BARRELS ARE OF THE LIGHT WEIGHT TYPE
|
$3,295
|
 |
M60E3 USGI STANDARD LENGTH BBLS, NEW, COMPLETE |
$ |
 |
U.S.G.I. M60-E3/E4/E6 HEAVY FLUTED COMMANDO BARREL ...
THIS IS A SUSTAINED FIRE COMMANDO BBL.... THIS IS THE HEAVY WEIGHT M60 SHORTY COMMANDO BBL SELDOM AVAILABLE TO M60 OWNERS... THIS BBL IS NEW FROM THE FACTORY AND IS COMPLETE AND READY FOR USE AS IT IS... THE SHORTY HEAVY BARREL HAS LIGHTENING FLUTE CUTS TO REDUCE SOME WEIGHT WHILE ALLOW HEAVY OPERATIONAL SUPPRESSIVE FIRE FROM YOUR M60-E3/E4/E6 ...ORIGINAL COMMANDO BBLS HAVE ALWAYS BEEN HARD TO COME BY BUT THE HEAVY WEIGHT FLUTED UNITS ARE EXTREMELY RARE. |
$3,495
|
 |
M60 / MINIGUN FEED SHOOT COVER |
|
 |
AS NEW, UNFIRED USGI M60 BBL ASSY COMPLETE WITH BIPOD, FLASH HIDER, GAS PISTON ASSY.... COMPLETE AND READY TO INSTALL AND SHOOT.... M60 PARTS ARE DRYING UP AND NEW UN-FIRED BBLS COMPLETE ARE NEARLY IMPOSSIBLE TO LOCATE... ONLY A HANDFULL AVAIL |
$1,295
|
 |
M60D OR MINI GUN 400 RND HELICOPTER AMMUNITION CAN.....THE LIGHT WEIGHT ALUMINUM AMMO CANS USED ON HELICOPTERS TO FEED THE M60D OR MINI GUN....THESE CANS ARE COMPARTMENTED TO HOLD 100 RNDS IN EACH AND FEED AS ONE LONG BELT....CANS CAN BE JOINED TOGETHER TO MAKE A 800, 1200 OR 1600 RND BELT IF NEEDED (FOR EXAMPLE, SEE MINIGUN VIDEO FROM KNOB CREEK SPRING 2005) THESE CANS HAVE LIGHTWEIGHT ALUMINUM LIDS WITH TWO CLEAR WINDOWS TO CHECK ON ROUNDS REMAINING....CANS ALSO HAVE ORIGINAL LOADING DECALS ON THE OUTSIDE -- THESE SELDOM AVAILABLE CANS ARE FLAT NEW AND IN THE ORIGINAL GOVT CONTRACTOR PACKAGE -- GREAT TO USE, OR FOR DISPLAY |
$1,295 |
 |
U.S.G.I. M60 AMMUNITION HOLDER -- THESE ARE A RARE U.S.G.I. M60 ACCESSORY -- THESE AMMO HOLDERS CLIP ON TO THE FEED TRAY AND HANGER OF AN M60 OR M60E3 MACHINE GUN. THE BOXES ARE HELD IN BY A SPRING LOADER/PUSHER DEVICE. WHEN THE FIRST 100 RNDS IS GONE YOU MOVE THE LEVER AND THE EMPTY BOX IS JETTISONED, MOVING THE NEXT BOX IN TO PLACE. GOVT. NUMBER AND DATE CODED FROM THE EARLY 1990'S, PROBABLY USED BY MARINE OR MOTORIZED FORCES. A SUPER COOL RARE ACCY IN NEW, UNUSED PARKERIZED CONDITION |
$295 |
 |
M60 REAR BUTT STOCK REPLACEMENT CAP -- A REPLACEMENT FOR THE M60 REMOTE MOUNTED (SOLINOIDE FIRING) MACHINE GUN....FITS THE REAR OF THE RECEIVER AND IS USED ON MOTORIZED VEHICLES AND AIRCRAFT. THIS IS A RARE ACCESSORY WHICH WE HAVE ONLY SEEN IN PHOTOS -- DIRECT FROM SACO DEFENSE |
$495 |
 |
U.S.G.I. M60 T&E ASSY |
$395 |
 |
U.S.G.I. M60 PINTLE -- THESE ARE ORIGINAL U.S.G.I. 2nd DESIGN M60 PINTLE ASSY.... 100% NEW IN WRAP. THEY ARE IN GOVT ANTI RUST PAPER WRAP AND FACTORY SEALED. M60 PINTLES LIKE ALL G.I. MOUNTS ARE GETTING HARD TO GET TODAY WITH MORE AND MORE SEMI AUTO M60's ENTERING THE MARKET PLACE. THESE ARE PREMIUM CONDITION EXAMPLES SELDOM AVAILABLE UNISSUED. |
$120 |
 |
U.S.G.I. PINTLE MOUNT ADAPTER. -- THIS IS THE FIRST TIME WE HAVE EVER SEEN OR HAD THIS TYPE OF PINTLE ADAPTER. THIS ITEM ALLOWS YOU TO MOUNT AN M2 AND M3 SMALL TAPER PINTLE TO THE LARGE PEDESTAL MOUNT PINTLE. THIS ADAPTER IS FOR M60, M2.50, 1919, ANM2, MAG 58/M240 AND M249/MINIMI. THESE UNITS ARE NIW AND COMPLETE WITH MILITARY QUICK DISCONNECT PIN AND CABLE ASSY. ALL DATE CODED AND MAKER MARKED..... MUST HAVE COST THE GOVT A MINT. ONLY A HANDFUL AVAILABLE |
$195 |
| AVAILABLE |
M60 PARTS - REAR SITE ASSY |
$350 |
| AVAILABLE |
M60 PARTS - FEED LEVER ASSY, TOP COVER |
$95 |
| AVAILABLE |
M60 PARTS - FEED PAWL |
$45 |
| AVAILABLE |
M60 PARTS - SEAR |
$85 |
| AVAILABLE |
M60 PARTS - TRIPOD PINTLE W/ T&E YOKE ADAPTER |
$95 |
 |
M60 PARTS - BUFFER ASSY |
$295 |
| AVAILABLE |
M60 PARTS -BOLT ASSY COMPLETE IN WRAP
|
$550 |
 |
M2 TRIPOD - NEW MADE TRIPOD FOR SHOOTING & DISPLAY -- HIGH QUALITY MANUFACTURED UNITS AT LESS THAN 1/2 THE COST OF U.S.G.I. MODELS |
$600 |
| AVAILABLE |
M60 PART - E4 HEAT-SHIELDED HAND GUARD |
$595 |
 |
U.S.G.I. M60 MACHINE GUN SLINGS. THESE ARE THE ONES MISSING FROM MOST M60 AND M60E3 MACHINE GUNS.
|
$29.95 |
 |
M60/M60E3 CHARGING HANDLE ASSY -- NEW |
$395 |
 |
M60 E3 COMPLETE BIPOD ASSY -- NEW |
$395 |
 |
M60 E3 HEATSHIELD (FOREARM) -- NEW |
$195 |
 |
M60 E3 FORWARD PISTOL GRIP ASSY. |
$195 |
 |
M60 E3 STRIPPED TOP COVER ASSY - NIW |
$695 |
 |
M60/M60E3 ROLLER FEED TRAY |
$295 |
 |
M60/M60E3 BOLT CAM ACTUATOR |
$225 |
