armlogo.gif - 3552 Bytes e/mail: info@autoweapons.com


COLT ASSORTED ACCYS & MAGAZINES COST / ITEM
coltboltserratebs
COLT BOLT ...A RARE, EARLY COLT BOLT WITH CHROME EXTRACTOR AND SERRATED FORWARD ASSIST .... EMAIL TO PURCHASE
$1,295
COLT/ARMALITE AR-15/M16 MODEL 601 CHROME BOLT/CARRIER ASSEMBLY, COMPLETE.... A RARE, VERY EARLY CHROME ARMALITE/COLT MODEL 601 BOLT/CARRIER GROUP WITH EARLY FIRING PIN.... THIS RARE COLLECTOR GRADE ITEM CAME FACTORY EQUIPPED ON THE ORIGINAL ARMALITE/COLT ARMALITE 601 MACHINE GUNS.... THIS BOLT/ SMOOTH SIDE CARRIER GROUP IS IN EXCELLENT/MINTY CONDITION AND IS PROOF "P" AND "M" MARKED.... THIS ITEM WAS PULLED DIRECTLY FROM COLT MANUFACTURING YEARS AGO AND RECENTLY FOUND IN ONE OF WAREHOUSE BUILDINGS WERE IT AND SEVERAL OTHER COLT ITEMS HAVE BEEN SITTING, FORGOTTEN, FOR MANY YEARS.... IF YOU ARE A COLT COLLECTOR OR HAVE A ARMALITE COLT MACHINE GUN EITHER MISSING OR WANTING A NEVER AVAILABLE, EARLY ORIGINAL BOLT GROUP THIS IS YOUR CHANCE..... EMAIL TO PURCHASE
$995
COLT/ARMALITE AR-15/M16 MODEL 601 CHROME BOLT/CARRIER ASSY, TRANSITIONAL AND COMPLETE.... A RARE, VERY EARLY CHROME ARMALITE/COLT MODEL 601 BOLT HEAD/COLT SERRATED BOLT CARRIER BOLT GROUP.... THIS RARE COLLECTOR GRADE BOLT AND CHROME CARRIER CAME FACTORY EQUIPPED ON THE ORIGINAL ARMALITE/COLT ARMALITE 601 MACHINE GUNS.... THIS BOLT IS IN EXCELLENT CONDITION AND IS PROOF "P" MARKED AND WAS FACTORY ASSEMBLED IN THE LATER "C" MARKED COLT SERRATED M16 FORWARD ASSIST CARRIER... THIS IS A COMPLETE READY TO DROP IN UNIT.... THE CHROME BOLT HEAD CLEAN VERY EASILY DUE TO THE COATING OF CHROME USED.... THIS IS A ONE OFF PART PULLED DIRECTLY FROM COLT MANUFACTURING YEARS AGO AND RECENTLY FOUND IN ONE OF WAREHOUSE BUILDING WERE IT AND SEVERAL OTHER COLT/ARMALITE ITEMS HAD BEEN PACKED AWAY FOR MANY YEARS.... THE GROUPING HAS SEEN ONLY TEST FIRED USE AND WE WILL UNDER RATE THE CONDITION AT EXCELLENT TO AVOID ANY ISSUES ON THIS SUPER RARE BOLT HEAD. .... EMAIL TO PURCHASE
$450
COLT/ARMALITE AR-15/M16 MODEL 601 CHROME BOLT ASSEMBLY, COMPLETE.... A RARE, VERY EARLY CHROME ARMALITE/COLT MODEL 601 BOLT HEAD.... THIS RARE COLLECTOR, GRADE ITEM CAME FACTORY EQUIPPED ON THE ORIGINAL ARMALITE/COLT ARMALITE 601 MACHINE GUNS... THIS BOLT IS IN EXCELLENT CONDITION AND IS PROOF "P" MARKED.... THIS IS A ONE OFF PART PULLED DIRECTLY FROM COLT MANUFACTURING YEARS AGO AND RECENTLY FOUND IN ONE OF WAREHOUSE BUILDINGS WERE IT HAS BEEN SITTING FOR YEARS.... EMAIL TO PURCHASE
$295
COLT 9MM SMG BOLT ASSEMBLY - LATEST GENERATION ... ORIGINAL COLT 9MM BOLT ASSEMBLY AND NOT A CHEAP & INFERIOR KNOCK OFF... IF YOU NEED A SPARE OR REPLACEMENT HER IT IS .... EMAIL TO PURCHASE
$495
COLT M16 BOLT / CARRIER GROUP, "C" MARKED CARRIER... "MPC" MARKED BOLT HEAD AND INK STAMP... NEW- COMPLETE ... EMAIL TO PURCHASE
$325
coltsemiboltas
COLT AR15 BOLT AND CARRIER ASSY (FOR SEMI AUTOMATIC RIFLES AND CARBINES - NEW -- 100% COLT
$295
colthandle.gif - 3761 Bytes
COLT CHARGING HANDLES - CHARCOAL GRAY-BLACK
$75
COLT M16/AR15 EARLY VINTAGE, MEDIUM GREY CHARGING HANDLE.... THIS GREY CHARGING HANDLE IS THE PERFECT REPLACEMENT FOR YOUR EARLY TRANSFERABLE COLT M16 WEAPON OR GREAT FOR A RETRO BUILD FOR THOSE WANTING A CLOSER COLOR MATCH TO THE EARLIER GREY COLOR AND NOT THE NEWER BLACK.... VERY RARE, IN NEW CONDITION, AS THIS COLOR HAS NOT BEEN MADE IN DECADES..... ONLY A SMALL QUANTITY AVAILABLE....EMAIL TO PURCHASE
$125
COLT 3x20 AR15/M16 SCOPE ....EMAIL TO PURCHASE
$1,295
coltacrstockas
COLT ACR (ADVANCED COMBAT RIFLE) COMPLETE COLLAPSING STOCK ASSEMBLY WITH HYDRAULIC BUFFER ....THIS IS THE COMPLETE STOCK ASSEMBLY SETUP OFF AN ORIGINAL COLT ACR RIFLE, USED IN TESTING .... INCLUDES THE STOCK MARKED WITH RACK NUMBER 344, THE CORRECT 8 POSITION BUFFER TUBE, THE HYDRAULIC BUFFER AND SPRING, THE END PLATE AND CASTLE NUT .... THE ACR (ADVANCED COMBAT RIFLE WAS DEVELOPED IN THE 1980s FOR DOD TESTING.... IT WAS BEING TESTED BY THE DEPARTMENT OF DEFENSE TO BE THE NEXT GENERATION COMBAT RIFLE AND WAS DESIGNED TO FIRE THE STANDARD NATO 5.56MM ROUND AS WELL AS THE RARE 5.56MM DUPLEX ROUND .... THIS IS A RARE ITEM FOR ANY SERIOUS COLT COLLECTOR .... EMAIL TO PURCHASE
$1250
COLT M16A2 RIFLE BUTT STOCK BODY.... THE STOCK BODY IS THE ONE ITEM NEVER AVAILABLE BY ITSELF AND THE ONE ITEM ON YOUR HIGH DOLLAR COLT M16A2 (OR COLT SEMI AUTO AR15-A2 RIFLE) THAT GETS DINGED UP, SCRATCHED AND GETS WEAR AND TEAR.... MAKE YOUR GUN LOOK FACTORY FRESH AGAIN WITH A SIMPLE REPLACEMENT .... EMAIL TO PURCHASE
$175
HECKLER AND KOCH HK416D MACHINE GUN LOWER PARTS KIT... THIS IS A FACTORY HK GERMAN PARTS SET, COMPLETE WITH HK MARKED COLLAPSING BUTT STOCK, BUFFER TUBE, BUFFER CATCH, SPRING AND ROLL PIN, LOCK NUT W/ PLATE, COMPLETE HK SAFE/SEMI/AUTO MACHINE GUN FIRE CONTROL GROUP INCLUDING HAMMER AND SPRING, TRIGGER AND SPRING, AUTO SEAR AND SPRING, DISCONNECTOR, HAMMER/TRIGGER/SEAR PINS, SELECTOR, DETENT AND SPRING, PISTOL GRIP, SCREW/WASHER, COMPLETE MAG CATCH, BOLT RELEASE, ROLL PIN/SPRING AND PLUNGER, TRIGGER GUARD AND ROLL PIN, TAKE DOWN PINS, DETENTS AND SPRINGS.... THIS KIT IS NEW! THIS HK 416D FACTORY LOWER PARTS SET IS A GREAT SPARE PARTS SET FOR YOUR HK416D AND CAN BE INSTALLED AND USED ON ANY REGISTERED MIL SPEC M16-TYPE MACHINE GUN, AS PARTS INTERCHANGE IN EITHER WEAPON TYPE... IF YOU WANT THE BEST THEN THIS KIT IS IT! ... EMAIL TO PURCHASE
$995
COLT EARLY XM177, M16 COMMANDO AND M16 CARBINE STOCK FOOT ....EARLY COLT XM177, M16 COMMANDO AND M16 CARBINE STOCK ... VERY RARE ORIGINAL COLT RETRO VINYL-ACETATE COATED ALUMINUM CAR CARBINE COLLAPSIBLE BUTTSTOCK... ALUMINUM STOCK BODY COATED WITH VINYL ACETATE ... PERFECT FOR YOUR XM177 OR RETRO COLT BUILD ... EMAIL TO PURCHASE
$695
EARLY COLT XM177, M16 COMMANDO AND M16 CARBINE COMPLETE STOCK ASSEMBLY ... VERY RARE ORIGINAL COLT RETRO VINYL-ACETATE COATED ALUMINUM CAR CARBINE COLLAPSIBLE BUTTSTOCK WITH THE CORRECT TWO POSITION GREY COLT BUFFER TUBE, EARLY UNMARKED CARBINE BUFFER, LOCK PLATE, EARLY LOCK RING WITH THE ROUND PIN HOLE AND CARBINE RECOIL SPRING ... PERFECT FOR YOUR XM177, COMMANDO OR CARBINE RETRO COLT BUILD .... EMAIL TO PURCHASEE
$995
COLT FACTORY M16/M16A1 CUTAWAY BUTT STOCK ASSEMBLY..... THIS RARE FACTORY CUT-AWAY STOCK IS COMPLETE WITH CUT-AWAY BUFFER TUBE AND CUT-AWAY BUFFER.... CUT OUT SECTIONS OF STOCK ARE HIGHLIGHTED IN YELLOW TO ALLOW THE VIEWER TO EASILY SPOT THE INNER WORKING OF THE M16 BUFFER SYSTEM FOR TRAINING OR FOR DISPLAY... FACTORY CUT-AWAY PARTS SELDOM COME ON THE MARKET DUE TO THE EXTENSIVE LABOR INVOLVED IN THE MACHINE OPERATIONS TO PRECISELY MACHINE AWAY THE OPENINGS.... A VERY SCARCE COLT ITEM FOR YOUR MACHINE GUN COLLECTION.... COMPLETE WITH STOCK, CUTAWAY BUFFER, BUFFER TUBE, RECOIL SPRING AND SCREW .... EMAIL TO PURCHASEE
$595
COLT COLLAPSING SHOULDER STOCK.... THESE ARE NEW COLT CARBINE,COMMANDO AND SMG SHOULDER STOCK FOOT ASSEMBLY .... FACTORY REPLACEMENTS TO UP GRADE DAMAGED AND WORN STOCKS, EASY NO TOOL REPLACEMENT WILL MAKE YOUR EXPENSIVE GUN LOOK FRESH..... NO LONGER PRODUCED BY COLT ... "N" AND "1" MARKED UNDER LATCH.... EMAIL TO PURCHASE
$595
ORIGINAL COLT FACTORY VINTAGE M16/M16A1 RIFLE STOCK W/BUFFER TUBE AND SHORT SCREW ASSEMBLY... THIS VERY RARE AND IN NEW CONDITION RIFLE STOCK WILL UPGRADE ANY BEAT LOOKING RIFLE STOCK ON YOUR BIG DOLLAR TRANSFERABLE VINTAGE COLT M16/M16A1 MACHINE GUN ... GREAT AS A SPARE OR AS AN UPGRADE REPLACEMENT.... A RARE FIND..... EMAIL TO PURCHASE
$595
coltm4footas
COLT M4 FACTORY ENHANCED COLLAPSING BUTT STOCK ASSEMBLY .... REINFORCED LARGE SHOULDER PLATFORM, METAL LOWER EDGE MOUNT SLING LOOP .... EMAIL TO PURCHASE
$295
coltm4completestockas
COLT M4 ENHANCED COMPLETE STOCK ASSEMBLY... EMAIL TO PURCHASE
$495
COLT FACTORY CARBINE/ COMMANDO COLLAPSING STOCK ASSEMBLY .... ALL COLT ... INCLUDES THE STOCK, H MARKED BUFFER, FOUR POSITION BUFFER TUBE, CASTEL TYPE LOCK NUT AND LOCK PLATE AND CARBINE SPRING .... PERFECT UP GRADE FOR YOUR CARBINE, COMMANDO OR RETRO COLT BUILD ..... EMAIL TO PURCHASE
$795
ORIGINAL "NOS" COLT EARLY PIN TYPE LOCK NUT FOR COLLAPSING BUTT STOCK.... THIS IS THE TYPE OF LOCK NUT USED ON EARLY M16 TYPES, XM177 AND CARBINES.... USES THE ROUND PIN LOCK RATHER THEN THE LATER TYPE CASTLE NUT FOUND ON THE LATER CARBINES, COMMANDOS AND M4 CARBINE TYPES.... THE ROUND PIN EARLY TYPE LOCK NUTS HAVE NOT BEEN MADE IN DECADES.... IF YOU WANT A REPLACEMENT FOR YOUR BUGGERED UP LOCK NUT, MISSING THE CORRECT EARLY LOCK NUT FOR YOUR BIG DOLLAR COLT COMMANDO/XM177 OR CARBINE OR THE CORRECT NUT FOR A EARLY TYPE RETRO BUILD THIS NUT IS IT.... ONLY A SMALL AMOUNT AVAILABLE AND THERE ARE NO MORE! A SMALL BATCH FOUND AT THE COLT FACTORY AND WE GOT THEM .... EMAIL TO PURCHASE
$85
COLT DEA/DOE M16A2 9MM SMG UPPER ASSEMBLY AND COLT COLLAPSING STOCK W/RARE DEA/DOE HYDRAULIC BUFFER COLT FACTORY "DEA" 9MM SUBMACHINE GUN UPPER .... FACTORY BUILT UPPER ASSEMBLY FROM A GOVERNMENT CONTRACT, MADE FOR THE DRUG ENFORCEMENT ADMINISTRATION.... THE SHORT PDW-TYPE UPPER HAS SHORT BARREL, SHORT HAND GUARDS, HAND PROTECT FRONT SIGHT BLOCK W/ FLIP UP FRONT SIGHT .... COMPLETE W/ BOLT AND CHARGING HANDLE .... THIS UPPER AND COLLAPSING STOCK KIT COMBO IS A RARE SET UP AS MANY DEA/DOE MACHINE GUNS CAME WITH STANDARD 9MM RECOIL BUFFER AND SPRING.... THERE WAS A SMALL, SPECIAL GOVERNMENT ORDER REQUIRING THE VERY RARE COLT 9MM SMG/DEA/DOE GUNS TO HAVE THE HYDRAULIC BUFFER AND MATCHING SPRING..... THIS SET INCLUDES THE COMPLETE FACTORY UPPER, THE EARLY TYPE CARBINE/COMMANDO "N" & "1" MARKED STOCK FOOT, TWO POSITION STOCK BUFFER TUBE, EARLY PIN TYPE LOCK NUT, LOCK PLATE, SPRING AND HYDRAULIC BUFFER.... A NEVER AVAILABLE SET..... EMAIL TO PURCHASE
$6,995
colt9bufferas
COLT 9mm SUBMACHINE GUN BUFFER ASSEMBLY... THIS IS THE HEAVY BUFFER AND SPRING COMBO FOR THE COLT RO635/RO633 9mm SUBMACHINE GUN.... THIS BUFFER IS NEEDED FOR PROPER OPERATION OF THE FIREARM WITH THE 9MM UPPER ....
$275
colt9springs
COLT 9mm SUBMACHINE GUN HEAVY SPRING FOR THE COLT RO635/RO633 9mm SUBMACHINE GUN....
$35
coltlmgbuffspringas
COLT LMG HYDRAULIC BUFFER AND "GREEN" SPRING ASSY... THIS IS A HARD TO FIND LMG BUFFER ASSY.... THE HYDRAULIC BUFFER IS THE ITEM USED TO SLOW THE COLT M16 LMG DOWN TO A SMOOTH FIRING RATE WHILE REDUCING RECOIL AND POUNDING.... THIS BUFFER AND SPRING CAN BE USED WITH ANY 5.56mm COLT M16/AR15 TYPE FIREARM, EITHER FULL AUTO OR SEMI AND OPEN BOLT OR CLOSED BOLT.... EMAIL TO PURCHASE
$975
colthydrolmgbuffers
COLT LMG HYDRAULIC BUFFER .... THIS IS A HARD TO FIND LMG BUFFER ... USED TO SLOW THE COLT M16 LMG DOWN TO A SMOOTH FIRING RATE WHILE REDUCING RECOIL AND POUNDING.... EMAIL TO PURCHASE
$795
coltgreensprings
COLT LMG "GREEN" RECOIL SPRING .... THIS IS A HARD TO FIND ITEM ... EMAIL TO PURCHASE
$195
COLT FACTORY "DEA" 9MM SUBMACHINE GUN UPPER ... FACTORY BUILT UPPER ASSEMBLY FROM A GOVERNMENT CONTRACT, MADE FOR THE DRUG ENFORCEMENT ADMINISTRATION. ... THE SHORT PDW TYPE UPPER HAS SHORT BARREL, SHORT HAND GUARDS, HAND PROTECT FRONT SIGHT BLOCK W/ FLIP UP FRONT SIGHT.... COMPLETE W/ BOLT AND CHARGING HANDLE .... EMAIL TO PURCHASE
$6,195
COLT M16A1 20" RIFLE UPPER ASSEMBLY.... THIS IS An ORIGINAL, EARLY, COLT FACTORY M16A1 20 RIFLE UPPER... THE UPPER HAS ALL THE EARLY M16A1 FEATURES SUCH AS THE TEAR DROP FORWARD ASSIST LEVER, THE FULL OPEN BIRD CAGE FLASH HIDER, EARLY REAR DRUM SITE, TRIANGULAR HARD GUARDS, EARLY MEDIUM GRAY FINISH AND CHROME LINED BARREL.... THIS UPPER IS IN NEW LIKE CONDITION BOTH INSIDE AND OUT AND WOULD BE PERFECT ADDITION FOR SOMEONE WHO HAS A TRANSFERABLE COLT M16/M16A1 LOWER MISSING ITS CORRECT UPPER.... THESE FACTORY UPPERS HAVE NOT BEEN AVAILABLE OR MADE IN DECADES AND THIS IS ONE OF ONLY A HANDFUL WE EVER HAD TO OFFER IN THE LAST 25 YEARS.... IF YOU WANT TO CORRECT YOUR COLT FACTORY M16/16A1 TYPE MACHINE GUN, OR WOULD LIKE TO HAVE A SPARE TO PUT AWAY IN PLACE OF ONE THAT YOU SHOOT, OR ARE LOOKING TO DO A CORRECT VIETNAM ERA RETRO BUILD OF A COLT M16 RIFLE TYPE THEN HERE IT IS ... RARE, RARE, RARE .... AVAILABLE WITH COLT "C" MARKED BOLT/BOLT CARRIER GROUP AND NEW, COLT, MATCHING EARLY GRAY CHARGING HANDLE .... EMAIL TO PURCHASE
$2,995, $3,465 w/ BCG
COLT M16A1 14.5" CARBINE FACTORY CUT-AWAY TRAINING UPPER ASSEMBLY, COMPLETE.... THIS IS A VERY,VERY RARE COLT FACTORY M16A1 CARBINE MACHINE GUN TRAINING UPPER....THE UPPER HAS BEEN SECTIONED AND CUT-AWAY TO SHOW MILITARY ARMORERS AND SERVICE/L.E. PERSONNEL THE FEATURES AND FUNCTION OF THE COLT M16 PLATFORM .... BARREL, BOLT/CARIER, CHARGING HANDLE, GAS TUBE TO GAS KEY AND FRONT SITE BASE HAVE BEEN SECTIONALIZED TO SHOW THE OPERATION OF THE GAS IMPINGEMENT SYSTEM.... UPPER ITSELF HAS BEEN CUT-AWAY FOR VIEWING THE FORWARD ASSIST OPERATION AS WELL AS TO SEE HOW THE BOLT LOCKING LUGS FUNCTION.... THERE ARE MANY MANY HOURS OF COLT FACTORY MACHINING TIME TO BUILD THESE CUT-AWAY UPPERS (AND COMPLETE CUT-A-WAY GUNS) .....LABOR COST TO HAVE ONE MADE WOULD BE ASTRONOMICAL, OUTSIDE THE COLT FACTORY AND EVEN COLT FACTORY UNION LABOR MACHINE TIMES WERE HEAVY AND COST COLT A FORTUNE.... COLT BUILT THESE TO SUPPORT THE TENS OF THOUSANDS OF M16 TYPE MACHINE GUNS THEY BUILT AND SOLD ANNUALLY..... A VERY RARE COLT ACCESSORY YOU WILL NOT SEE FOR SALE TOO OFTEN IF EVER.... ALL CUT-AWAY PARTS ARE COLT FACTORY COLORIZED IN YELLOW TO DIFFERENTIATE AND HIGHLIGHT THE COMPONENTS.... THIS UPPER HAS THE A1 DRUM SITE, TEAR DROP FORWARD ASSIST, NON TAPERED DELTA RING, A1 FLASH HIDER AND SLIM CARBINE/COMMANDO HAND GUARDS... THE ULTIMATE ITEM FOR THE COLT M16 COLLECTOR, MACHINE GUN COLLECTOR OR THE PERSON WHO LOVES COOL AND UNUSUAL THINGS LIKE CUT-AWAYS. No. C-1 .... EMAIL TO PURCHASE
$3,695
COLT M16A2/M42 14.5" FACTORY CUT-AWAY TRAINING UPPER ASSEMBLy, COMPLETE.... THIS IS A VERY, VERY RARE COLT FACTORY M16AS/M4A2 M4 STEPPED BARREL CARBINE MACHINE GUN TRAINING UPPER....THE UPPER HAS BEEN SECTIONED AND CUT-AWAY TO SHOW MILITARY ARMORERS AND SERVICE/L.E. PERSONNEL THE FEATURES AND FUNCTION OF THE COLT M16 PLATFORM OF WEAPONS.... BARREL, BOLT/CARIER, CHARGING HANDLE, GAS TUBE TO GAS KEY AND FRONT SITE BASE HAVE BEEN SECTIONALIZED TO SHOW THE OPERATION OF THE GAS IMPINGEMENT SYSTEM.... UPPER HAS BEEN CUT-AWAY TO SHOW THE FORWARD ASSIST OPERATION AS WELL AS TO SHOW HOW THE BOLT LOCKING LUGS FUNCTION..... THE SITES AREA HAVE ALSO BEEN SECTIONED TO SEE THE OPERATION OF THE NEW A2 TYPE FRONT AND REAR SITES.... THERE ARE MANY MANY HOURS OF COLT FACTORY MACHINING TIME TO BUILD THESE CUT-AWAY UPPERS (AND COMPLETE CUT-A-WAY GUNS) .... LABOR COSTS TO HAVE ONE MADE WOULD BE ASTRONOMICAL OUTSIDE THE COLT FACTORY AND EVEN COLT FACTORY UNION LABOR MACHINE TIMES WERE HEAVY AND COST COLT A FORTUNE.... COLT DID THESE TO SUPPORT THE TENS OF THOUSANDS OF M16 TYPE MACHINE GUN THEY BUILT AND SOLD ANNUALLY.... A VERY RARE COLT ACCESSORY YOU WILL NOT SEE FOR SALE OFTEN... ALL CUT-AWAY PARTS ARE COLT FACTORY COLORIZED IN YELLOW TO DIFFERENTIATE AND HIGHLIGHT THE COMPONENTS.... THIS UPPER HAS THE A2 FULL ADJUSTABLE REAR SITE, BUTTON HEAD FORWARD ASSIST, TAPERED DELTA RING, A2 FLASH HIDER AND SLIM CARBINE/COMMANDO HAND GUARDS.... THE ULTIMATE ITEM FOR THE COLT M16 COLLECTOR, MACHINE GUN COLLECTOR OR THE PERSON WHO LOVES COOL AND UNUSUAL THINGS LIKE CUT-AWAYS ... NO. C-2 ... EMAIL TO PURCHASE
$3,695
COLT FACTORY MARKED HEAVY BARRELED M16A2 UPPERS, NEW IN WRAP WITH BAYONET LUG, 20" UPPER ASSY, 1/7 TWIST, ROUND HAND GUARDS, NEW FLASH HIDER, NEW A2 STYLE ... AVAILABLE WITH OR WITHOUT BCG & CHARGER .... Part No. C-4 ... EMAIL TO PURCHASE
$2,295 w/ BCG & Charger $2,695
COLT FACTORY MARKED M16A2 UPPERS IN "LATEST BLACK COLOR", NEW IN WRAP WITH BAYONET LUG, 20" UPPER ASSY, 1/7 TWIST, ROUND HAND GUARDS, NEW FLASH HIDER LATEST CRUSH WASHER FOR FLASH HIDER. .... THIS IS A NEW A2 STYLE UPPER WITH THE COLOR TO MATCH THE NEWEST PRODUCTION COLT FACTORY SEMI AND FULL AUTO MACHINE GUN LOWERS, AS WELL AS MOST BLACK A FTERMARKET AR15-TYPE SEMI AUTO LOWERS..... THIS A PART OF A SMALL SPECIAL ORDER GOVT RUN, WHICH HAPPENED PRIOR TO COLT FILING FOR BANKRUPTCY ---- WHO KNOWS IF THESE WILL EVER BE AVAILABLE AGAIN ... AVAILABLE WITH OR WITHOUT BCG & CHARGER .... Part No. C-5 ... EMAIL TO PURCHASE
$1,995 w/ BCG & Charger $2,465
COLT CONTRACT LICENSEE ELISCO (THE REPUBLIC OF THE PHILIPPINES) M16A1 20" FACTORY RIFLE UPPER COMPLETE WITH BOLT GROUP AND CHARGER.... THIS IS A COLT CONTRACT ITEM ALMOST NEVER AVAILABLE IN THE USA.... THIS IS THE FIRST TIME ITEM OFFERED TO US FROM THE COLT MFG COMPANY COLLECTION AND IS A NEW/NEW TAKE OFF UPPER DIRECTLY FROM COLT.....THESE UPPERS ARE NEVER OFFERED SINCE NONE WERE IMPORTED FOR RETAIL SALE OR ANY OTHER USE SINCE THESE WERE USED ONLY ON COLT LICENSED WEAPONS FOR FOREIGN NATIONS .... A NICE SPARE UNIT FOR YOUR HIGH DOLLAR COLT M16A1 MACHINE GUN UPPER, WHICH IS GETTING HARDER TO REPLACE, OR FOR THOSE WANTING AN UPPER FOR A RETRO BUILD, AND OF COURSE, FOR THE "COLT TYPE" COLLECTOR OF COLT MFG COMPANY ITEMS.... YOU WILL NOT EASLY FIND ANOTHER ONE OF THESE UPPERS FOR YOUR COLLECTION.... UPPER FEATURES A1 SITES, LARGE PYRAMID FORWARD ASSIST BUTTON, 20" RIFLE PENCIL BBL MARKED "CM P", A1 TYPE PHILIPPINE CONTRACT FLASH HIDER, TRIANGLE FORE-GRIPS AND ORIGINAL BLACK ENAMEL OVER COLT-GREY TYPE FINISH.... IF YOU WANT SOMETHING REALLY SLICK FOR YOUR COLT COLLECTION THIS IS IT... Part NO. C-3 ... EMAIL TO PURCHASE
$1,995
coltm16a220as
COLT FACTORY MARKED M16A2 UPPERS, EARLY GRAY COLOR, NEW IN WRAP WITH BAYONET LUG, 20" UPPER ASSY, 1/7 TWIST, ROUND HAND GUARDS, NEW FLASH HIDER, NEW A2 STYLE ... AVAILABLE WITH OR WITHOUT BCG & CHARGER .....PART NO. C-6 ... EMAIL TO PURCHASE
$2,295, w/ BCG & Charger $2,695
COLT LE6940 MONOLITHIC 16" UPPER ASSEMBLY.... THIS IS THE JUST OFF THE COLT PRODUCTION LINE ....FEATURES A N M4 TYPE 16" BBL ASSEMBLY THAT IS NOTCHED FOR THE M203 GREANADE LAUNCHER.... THE BBL IS IN 1/7 TWIST AND MARKED C MP 556 NATO 1/7.... ONE-PIECE RAILED UPPER W/FORWARD ASSIST, CASE DEFLECTOR AND HAS RAS NUMBERS ON SIDE RAILS AS WELL AS TOP RAIL AND IS COMPLETE WITH BACK UP REMOVABLE REAR SITE..... FRONT SITE OF THIS UPPER IS A FLIP UP TYPE SO YOU CAN FLIP DOWN OUT OF THE WAY WHEN YOU ARE USING EOTECH, AIMPOINTS, ACOG OR OTHER OPTICS/AIMER UNITS.... ALSO HAS BAYONET LUG AND A2 TYPE FLASH HIDER.... IF YOU WANT A COLT 6940 BUT ALREADY HAVE OTHER AR15/M16 TYPE FIREARMS THEN THIS UPPER WILL GIVE YOU THAT OPTION.... EXTREMELY RARE UPPER ... AVAILABLE WITH OR WITHOUT BCG & CHARGER ... Part NO. C-7 ... EMAIL TO PURCHASE
$2,495, w/ BCG & Charger $2,965
COLT FACTORY MARKED, LATEST BLACK COLOR, FLAT TOP M16A4 (R0901/R0902) UPPER...FACTORY NEW AND CURRENT GOVT PRODUCTION, PRODUCED AS PART OF A CONTRACT ORDER...RARE IN TODAY'S MARKET...20" UPPER ASSY, 1/7 TWIST, ROUND HANDGUARDS, "F" MARKED FRONT SITE BASE AND R.A.S. NUMBERS WITH BAYONET LUG, PART NO. R0905...WITH THIS UPPER YOU CAN ATTACH ANY OPTICAL AIMER, NIGHT/THERMAL VISION DEVISE, OR A3 CARRY HANDLE...THIS IS THE SAME UPPER USED BY OUR SPEC. OPS. TROOPS IN IRAQ...COMPLETE WITH CARRY HANDLE ... AVAILABLE WITH OR WITHOUT BCG AND CHARGER Part No. C-8 ... EMAIL TO PURCHASE
$2,295, w/ BCG & CHARGER, $2,695
coltupperc9as
COLT M4A3 10.3" BBL NAVY COMMANDO UPPER ASSEMBLY...A SPECIAL PRODUCTION, SPECIAL NAVY ORDER.... M4A3 10.3" HEAVY PROFILE UPPER FOR A GOVT CONTRACT...THERE WERE A FEW EXTRA FROM THIS RARE PRODUCTION RUN....UPPER FEATURES AN M4 FLAT TOP UPPER WITH R.A.S. NUMBERS, STAMPED M4 IN FRONT OF RECEIVER NEAR DELTA RING, DUAL FEED CUTS FOR THE FEED RAMP, REMOVABLE CARRY HANDLE, SPECIAL M4 10" BBL WITH "F" STAMPED FRONT SITE POST... HAS A SIDE SLING ADAPTER AND HEAVY DOUBLE INSULATED M4 HAND GUARDS ....A VERY RARE COLT PART...NEW IN BAG...VERY FEW AVAILABLE ... AVAILABLE WITH OR WITHOUT BCG & CHARGER ... Part No. C-9 .... EMAIL TO PURCHASE
$2,595 W/ BCG $3,065
coltupperc10as
COLT UPPER - M16M4 A2 - COLT FACTORY UPPER - EARLY GRAY - M4 MARKED NEAR DELTA RING ON CARRY HANDLE, COLT "C" MARKED ON RECEIVER, 14.5", 1/7 TWIST BBL, SIDE SLING, ADAPTER, NOTCHED FOR M203, NEWER STYLE FLASH HIDER, FORWARD ASSIST, LARGER STYLE HAND GUARDS, BAYONET LUG ... NIB... AVAILABLE WITH OR WITHOUT BCG & CHARGER .... Part No. C-10 .... EMAIL TO PURCHASE
$2,395, w/ BCG & Charger $2,865
COLT LMG (LIGHT MACHINE GUN) HEAVY BBL UPPER ASSY. THESE COLT LMG UPPERS ARE FROM THE COLT LMG OPEN BOLT SQUAD AUTOMATIC. THE EXTREMELY HEAVY BBL IS HAMMER-FORGED FOR SUSTAINED AUTOMATIC FIRE. THESE UPPERS ARE REINFORCED IN THE REAR OF THE RECEIVER. THE GAS TUBE IS ALMOST DOUBLE IN DIAMETER AND IN THICKNESS -- THESE UPPERS WERE DESIGNED TO BE USED WITH BETA "C" MAG -- THE UPPER HAS ADJUSTABLE BIPOD ASSY INCLUDED. FORWARD PISTOL GRIP, OVERSIZED HANDGUARDS AND WEAPON CARRY HANDLE INCLUDED..... THIS EXTREMELY RARE UPPER IS A WORK OF ART!! .... AVAILABLE WITH COLT M16 BCG AND CHARGER ALSO EMAIL TO PURCHASE
$5,995, w/ BCG & CHARGER $6,465
COLT 9 MM SUBMACHINE GUN UPPER ASSY. NEW IN WRAP FACTORY UPPERS COMPLETE WITH BOLT AND CHARGING HANDLES - 10.5" BBL ... PART NO. C-12 ... EMAIL TO PURCHASE
$2,595
coltupper9mm16bs
COLT 9MM 16" UPPER KIT WITH FACTORY MAGAZINE ACCESSORY KIT AND BOX ... COMPLETE WITH BCG AND CHARGER ... EMAIL TO PURCHASE
$2,395
coltm4635cs
COLT R0635 9MM SUBMACHIINE GUN UPPER WITH M4 FAT DOUBLE INSULATED HANDGUARDS ... COMPLETE WITH BCG AND CHARGER ... EMAIL TO PURCHASE
$2,595
coltupperc13as
COLT M16M4 A3 UPPER ASSEMBLY, 14.5", NEW IN WRAP - THIS IS A COMPLETE BRAND NEW COLT UPPER ASSY, WITH CARRY HANDLE....M4 MARKED, HEAVY DOUBLE SHIELDED HAND GUARDS, M203 NOTCHED BBL, 1/7 TWIST, 14.5" BBL, SIDE SLING ADAPTER, FORWARD ASSIST, BAYONET LUG... BRAND NEW ... AVAILABLE WITH OR WITHOUT BCG AND CHARGER ... PART NO. C-13 ... EMAIL TO PURCHASE
$2,195, with BCG & CHARGER $2,665
coltupperc15bs
COLT M4A3 H/B SOCOM UPPER ASSEMBLY, 14.5" - NEW IN FACTORY WRAP - THESE ARE THE VERY RARE AND NEVER AVAILABLE TO THE PUBLIC COLT M4 HEAVY BBL....THESE ARE THE ONES IN CURRENT USE WITH SOCOM FORCES IN THE MIDDLE EAST -- NOT THE STANDARD M4A3 BUT HEAVY BBL UNDER THE HANDGUARDS, REQUIRING A SPECIAL HEAVY BUFFER "2" TO PREVENT "BOLT BOUNCE".....THE UPPERS HAVE THE WHITE R.A.S. NUMBERS -- COMPLETE W/ CARRY HANDLE .. PART NO. C-15 ... EMAIL TO PURCHASE
$2,495, w/ BCG & CHARGER $2,965
coltupperc14bs
COLT M16M4 A3 16" UPPER ASSY - NEW IN WRAP - THIS IS A COMPLETE BRAND NEW COLT UPPER ASSY, WITH CARRY HANDLE....M4 MARKED, HEAVY DOUBLE SHIELDED HAND GUARDS, M203 NOTCHED BBL, 1/7 TWIST, 16" BBL, SIDE SLING ADAPTER, FORWARD ASSIST, BAYONET LUG... W/ R.A.S. NEW NUMBERS AND 16" BBL - NEW IN WRAP ... AVAILABLE WITH OR WITHOUT BCG AND CHARGER ....Part No. C-14 ... EMAIL TO PURCHASE
$1995, w/ BCG & charger $2,465
coltm4a3hb16as
COLT M16M4 A3 16" H/B SOCOM UPPER ASSY ... AVAILABLE WITH OR WITHOUT BCG AND CHARGER ....Part No. C-24 ... EMAIL TO PURCHASE
$
coltupperc16as
COLT - GENUINE, FACTORY M16 A3 WITH REMOVABLE HANDLE/FLAT TOP COMMANDO 11.5" BBL UPPER, COLT FACTORY MARKED RECEIVER AND BBL W/ CARRY HANDLE .... AVAILABLE WITH OR WITHOUT BCG AND CHARGER... Part No. C-16..... EMAIL TO PURCHASE
$2195, w/ BCG & charger $2665
coltportupperas
COLT M231 PORT FIRING UPPPER ASSEMBLY .... EMAIL TO PURCHASE
$3,295
m4a3upassya.gif - 5297 Bytes
COLT M4A3 UPPER ASSY - COLT MARKED FACTORY UPPER WITH REMOVABLE CARRY HANDLE, UPPER IS "M4" MARKED, DUAL FEED CUTS, "RAS" MARKINGS ON FLAT TOP - A2 SITES, TACTICAL BLACK FINISH
$295
coltm16a4flatupas
COLT M16A4 FLAT TOP UPPER FOR 20" M16A2 GOVT OR 20" HEAVY BARREL ... EMAIL TO PURCHASE
$295
COLT M4 H/B (SOCOM) 14.5" HEAVY BBL ASSEMBLY... ...THIS IS THE SAME BBL USED ON THE M4A3 SOCOM UPPER FOR SPEC OPERATIONS GROUPS REQUIRING A BBL THAT CAN TAKE SUSTAINED FULL AUTO FIRE ... BARREL IS MARKED 1/7 CM/P, FRONT SITE POST IS "F" MARKED AND COMPLETE WITH BARREL NUT.... IF YOU ARE IN NEED OF A HEAVY DUTY REPLACEMENT BARREL OR A SPARE OF ONE OF THESE RARE COLT ITEMS THEN THIS IS IT.... NEW IN BAG. Part No. B-9 ... EMAIL TO PURCHASE
$1,665
20" COLT/ARMALITE EARLY 601 TYPE 20" RIFLE BARREL ASSEMBLY... THIS IS A NEW CONDITIONED 20" COLT RIFLED BARREL WITH THREE PRONG FLASH HIDER, LOCK WASHER, FRONT SITE ASSEMBLY, SLING SWIVEL AND IS ROLL MARKED "C M/P CHROME BORE" .... IF YOU ARE LOOKING FOR A RARE EARLY 20" COLT SPARE, REPLACEMENT/RETRO BUILD BARREL ASSEMBLY THIS EARLY BARREL IS IT.... Part No. E-19 ... EMAIL TO PURCHASE
$1,895
COLT M4 H/B (SOCOM) VERY RARE 16" HEAVY BBL ASSEMBLY... ...THIS IS THE SAME BBL USED ON THE M4A3 SOCOM UPPER FOR SPEC OPERATIONS GROUPS REQUIRING A BBL THAT CAN TAKE SUSTAINED FULL AUTO FIRE .... BBL IS MARKED 1/7 CM/P, FRONT SITE POST IS "F" MARKED AND COMPLETE WITH BBL NUT, SLING LOOP, A2 FLASH HIDER AND CRUSH WASHER.... IF YOU ARE IN NEED OF A REPLACEMENT HEAVY DUTY BARREL, A COLLECTOR OF RARE COLT ITEMS OR ARE CRAFTING A COLT 6920 HB BUILD, THIS BBL, NEW IN WRAP / NEW IN BAG, WILL DO THE TRICK ... Part No. C-2 ... EMAIL TO PURCHASE
$1,995
colt14socombblas
COLT M4 H/B (SOCOM) 14.5" HEAVY BBL ASSEMBLY... COMPLETE WITH DELTA RING, NEW IN WRAP AND IN GOVT SHIPPING CARTON...THIS IS THE SAME BBL USED ON THE M4A3 SOCOM UPPER FOR SPEC OPERATIONS GROUPS REQUIRING A BBL THAT CAN TAKE SUSTAINED FULL AUTO FIRE .... EMAIL TO PURCHASE
$1795
colta120bblas
COLT M16A1 20" VINTAGE RIFLE PENCIL BARREL, NEW UNFIRED RARE COLT PART COMPLETE WITH FRONT SITE BASE AND BBL NUT... 1/7 TWIST.... MAKE NO MISTAKE, THIS IS A FACTORY NEW COLT BBL AND NOT THOSE NEWLY MADE UP AFTERMARKET NON MILITARY ITEMS ON THE MARKET TODAY.... THE FACTORY CORRECT ITEM FOR YOU 25K PLUS M16A1 TYPE RIFLE... Part No. C-18 ... EMAIL TO PURCHASE
$1,495
coltm4a3bblas
COLT M16/M4 14.5" COMPLETE BBL ASSY. FOR FLAT TOP A3 UPPER. THIS NEW CURRENT PRODUCTION COLT BBL ASSY IS BRAND NEW FACTORY COLT. COMPLETE WITH "F" MARKED FRONT SIGHT ASSY, LOCK NUT AND BBL, DELTA RING, FLASH HIDDER AND SIDE SLING ADAPTER -- READY TO INSTALL --- NIW .... EMAIL TO PURCHASE
$995
ORIGINAL COLT M4 CARBINE / COMMANDO AND A4 RIFLE REMOVABLE CARRY HANDLE .... ORIGINAL COLT CARRY HANDLES FOR COLT FLAT TOP UPPER RIFLES .... AN ITEM THAT IS GETTING HARDER TO FIND ... THESE ARE THE REAL DEAL COLT CARRY HANDLES ... EMAIL TO PURCHASE
$175
COLT M4A3 H/B BUFFER ASSY "H2" .... REQUIRED FOR COLT H/B UPPERS TO PREVENT "BOLT BOUNCE"...... EMAIL TO PURCHASE
$175
COLT M4 "H" RECOIL BUFFER - THE CORRECT HEAVY BUFFER TO SLOW UP YOUR M16 TO THE CORRECT M4 RATE OF FIRE .... EMAIL TO PURCHASE
$65
COLT VERY EARLY UNMARKED CARBINE/COMMANDO/XM177 RECOIL BUFFER FOR COLLAPSING STOCK (GREENISH ANODIZED COLOR).... THE EARLY STYLE AND COLOR BUFFER ORIGINALLY USED AND MADE FOR THE EARLY GUNS.... PERFECT AS A SPARE, A REPLACEMENT FOR A WORN FACE OF YOUR CURRENT SHOOTER OR FOR BUILDING A RETRO CLONE THEN THIS ITEM IS FOR YOU.... NOT MADE IN 4 DECADES.... ...... EMAIL TO PURCHASE
$195
kacrailsitecs
KNIGHTS ARMAMENT CORPORATION (KAC) M203 RAIL MOUNTED(RAIL GRABBER) LEAF SITE FOR M203 GRENADE LAUNCHER....ONE OF THE HARDER KAC ITEMS TO COME BY FOR THE M203 GRENADE LAUNCHER. EMAIL TO PURCHASE
$325
kacm203qdas
KNIGHTS ARMAMENT CORPORATION (KAC) QUICK RELEASE M203 MOUNT ASSEMBLY.... THIS LITTLE Q/D MOUNT TAKES THE PLACE OF THE STANDARD CLAMP, BUSHING AND SCREW TYPE MOUNTING ATTACHMENT OF THE COLT or LMT M203... THE QD MOUNT ATTACHES WITH TWO HEX CAP SCREWS AND REMAINS PART OF THE M203....IF YOU WANT TO QUICKLY MOUNT OR DISMOUNT THE M203 YOU NEED ONLY PRESS THE RELEASE LEVER, UNSNAP THE BUCKLE AND REMOVE M203... TO INSTALL JUST SNAP ON WEAPON AND IT WILL LOCK IN PLACE.... GREAT FOR SWAPPING WEAPONS, UPPERS OR MOUNTING THE M203 ON THE KAC STANDALONE SHOULDER STOCK UNIT .... EMAIL TO PURCHASE
$650
COLT M203 40mm GRENADE LAUNCHER ACCESSORY PACK....VERY RARE KIT FOR THE M203... KIT IS NEW AND COMPLETE AND INCLUDES THE FACTORY M203 MANUAL, THE M203 MOUNTING KIT WITH BUSHINGS, CLAMP, SCREWS, SAFETY WIRE, CLEANING BRUSH AND REAR QUADRANT GRENADE LAUNCHING SITE ASSY ....EMAIL TO PURCHASE
$445
COLT M16A2 CARBINE AND COMMANDO FACTORY ACCY PACK... THE FACTORY ACCY PACKAGE THAT COMES WITH FACTORY PACKED GUNS...BRAND NEW, STILL FACTORY SEALED....COMES WITH COLT MAG, CLEANING KIT, CLEANING KIT POUCH, SLING AND CORRECT MANUAL FOR THE M16A2 CARBINE AND M16A2 COMMANDO...A RARE ACCY FOR YOUR EARLY VINTAGE TRANSFERABLE GUN... MAKE YOUR HIGH $$$ COMPLETE AGAIN LIKE IT LEFT THE COLT FACTORY YEARS AGO .... EMAIL TO PURCHASE
$295
COLT MATCH TARGET RIFLE VINTAGE FACTORY ACCESSORY/MAG KIT... THIS IS A SELDOM AVAILABLE FACTORY COLT ACCESSORY KIT/PACK/MAG KIT FOR THE MATCH RIFLE... COMES WITH (2) FACTORY 10 RND MATCH MAGS, CLEANING BRUSHES, MANUAL AND SLING... IF YOU ARE TRYING TO COMPLETE YOUR COLT MATCH TARGET TO FACTORY ORIGINAL WITH ACCESSORIES THEN THIS KIT IS A NECESSITY... ALSO FOR THOSE LOOKING FOR 10 RND COLT FACTORY MAGS FOR LONG RANGE PRONE FIRING WITHOUT HAVING THE LONGER 20 AND 30 RND MAGS IN THE WAY
$125
COLT M16A2 RIFLE FACTORY ACCESSORY PACK.... FACTORY ACCESSORY PACKAGES THAT COME WITH FACTORY PACKED GUNS.... 1990 DATE CODE..... THEY ARE BRAND NEW AND STILL FACTORY SEALED.... COME WITH COLT MAG, CLEANING KIT, SLING AND CORRECT MANUAL FOR THE M16A2 RIFLE.... A RARE ACCESSORY ... EMAIL TO PURCHASE
$285
COLT M16A2 CARBINE/M4 CARBINE FACTORY ACCESSORY PACK.... 2009 DATE CODE ... THE FACTORY ACCESSORY PACKAGE THAT COMES WITH FACTORY PACKED GUNS.... BRAND NEW AND STILL FACTORY SEALED.... COMES WITH COLT MAG, CLEANING KIT, CLEANING KIT POUCH, SLING AND CORRECT MANUAL FOR THE M16A2 CARBINE/M4 CARBINE.... A RARE ACCESSORY..... EMAIL TO PURCHASE
$225
COLT M4 CARBINE, COMMANDO, M16 CARBINE FACTORY ACCESSORY PACKAGE KIT W/BLANK FIRE ADAPTER ... 2009 DATE CODED MANUAL .... THE FACTORY ACCESSORY PACKAGE THAT COMES WITH FACTORY PACKED GUNS ... BRAND NEW AND STILL FACTORY SEALED.... COMES WITH 30 ROUND COLT MAG, CLEANING KIT, CLEANING KIT POUCH, YELLOW BLANK FIRE ADAPTER SLING AND CORRECT MANUAL FOR THE M4 CARBINE, COMMANDO, M16 CARBINE... A RARE ACCESSORY.... EMAIL TO PURCHASE
$275
jan1032.gif - 7123 Bytes
COLT M16A2 9mm SUBMACHINE GUN RO633,RO635 AND SEMI CARBINE FACTORY ACCESSORY PACK .... THE FACTORY ACCESSORY PACKAGES THAT COME WITH FACTORY PACKED GUNS .... BRAND NEW AND STILL FACTORY SEALED.... COME WITH COLT 32 ROUND SUBMACHINE GUN MAG, CLEANING KIT, CLEANING KIT POUCH, SLING AND CORRECT MANUAL FOR THE M16A2 9mm SMG..... A RARE ACCESSORY PACK..... EMAIL TO PURCHASE
$295
COLT LMG GRIP .... AN ORIGINAL COLT LMG AND AUTO RIFLE FORWARD PISTOL GRIP... THE MISSING PART NEEDED TO COMPLETE THE COLT LMG UPPERS .... VERY RARE ITEM AND ALL ORIGINAL... EMAIL TO PURCHASE
$295
COLT LMG R0750 BIPOD COLLAR ... OFTEN MISSING FROM THE COLT LMG UPPERS .... WE FOUND A SMALL STASH OF LOOSE PARTS AND A FEW OF THESE COLLARS WERE IN THERE.....THE COLLAR SLIDES ON TO THE HEAVY LMG BARREL AND INTERFACES WITH EITHER THE EARLY LMG BIPOD OR THE LATER M60 TYPE BIPOD USED ON FACTORY COLT LMG UPPERS AND MACHINE GUNS..... IT IS BOTH THE SPACER AND LOCKING COLLAR IF YOU DRILL AND ROLL PIN AS SHOWN IN THE PHOTOS .... A HARD TO FIND PART TO COMPLETE YOUR UPPER.... EMAIL TO PURCHASE
$295
coltgrippodas
USGI TYPE GRIP BIPOD, WITH STAINLESS STEEL REINFORCED BIPOD LEGS .... EMAIL TO PURCHASE
$225
m16gripas
USGI TYPE GRIP BIPOD, WITH STAINLESS STEEL REINFORCED BIPOD LEGS, IN FDE .... EMAIL TO PURCHASE
$225
COLT LMG BIPOD ... EMAIL TO PURCHASE
$750
coltlmgslings
COLT FACTORY LMG / AUTO RIFLE SLING ASSEMBLY ....THESE ARE SUPER RARE VERSIONS OF COLT SLINGS, DESIGNED TO BE USED ON THE LMG / AUTO RIFLE .... HAS A COATED WIRE SLING LOOP ON ONE END ... THE DESIGN ALLOWED IT TO BE LOOPED AROUND THE FRONT SIGHT POST SINCE THERE IS NO SLING ATTACHMENT POINT ON THE FRONT OF THE LMG / AUTO RIFLE ... AN EXTREMELY HARD TO FIND ITEM... EMAIL TO PURCHASE
$275
AVAILABLE
COLT M16A2/AR15A2 PISTOL GRIP W/ SCREW AND WASHER
$40
colt40mmbbls
COLT M203 40MM GRENADE LAUNCHER COMPLETE BBL ASSY -- FACTORY ASSEMBLED, NEW BBL, COMPLETE WITH HANDGUARD AND LOCATOR -- FACTORY MARKED AND READY FOR INSTALLATION .... EMAIL TO PURCHASE
$695
coltvintagehandas
COLT ORIGINAL, VINTAGE, NOS FACTORY EARLY TRIANGULAR HANDGUARD SET FOR THE M16/M16A1 FIREARM.... EMAIL TO PURCHASE
$995
coltcarbhandas
COLT M16A1/M16A2 CARBINE AND COMMANDO HAND GUARDS... THESE ARE FACTORY CARBINE AND COMMANDO UPPER HANDGUARDS. THESE HANDGUARDS ARE IN NEW CONDITION AND FACTORY COLT.... NO LONGER MANUFACTURED BY COLT ... EMAIL TO PURCHASE
$185
coltinsulathands
COLT M4 "FAT" DOUBLE INSULATED DUAL LINED CARBINE HANDGUARDS.... A HARD TO FIND, NIW, FACTORY COLT M4 HANDGUARDS.... WILL FIT ANY CARBINE OR COMMANDO TYPE COLT UPPER..... EMAIL TO PURCHASE
$90
colta2handas
COLT M16A2 RIFLE HANDGUARDS. THIS ARE FACTORY RIFLE HANDGUARDS... THEY WILL FIT ANY A2 OR A1 COLT UPPER.... THESE HANDGUARDS ARE NEW .... EMAIL TO PURCHASE
$110
coltdeahandas
COLT DEA/DOE 9MM SMG/M231 PORT FIRING GUN HAND GUARDS (NEW) ... EMAIL TO PURCHASE
$495 / SET
COLT M203 CARBINE / COMMANDO / M4 GRENADE LAUNCHER LEAF SITE .... EMAIL TO PURCHASE
$295
coltm203hgas
COLT M203 12" RIFLE BARREL HANDGUARD WITH LEAF SIGHT ... THESE ARE ORIGINAL COLT BLACK COMPOSITE NYLON HANDGURADS WITH THE INNER ALUMINUM HEAT SHIELD FOR USE WITH THE 40MM M203 GRENADE LAUNCHER ... INCLUDE THE CORRECT TWO SCREW MOUNTED LEAF SIGHTS....THESE ARE ORIGINAL COLT HANDGUARDS ... HARD TO FIND .... EMAIL TO PURCHASE
$295
EARLY 20 RND COLT FACTORY M16/AR15 MAGAZINES... THESE ARE VERY CLEAN, ORIGINAL METAL FOLLOWER FACTORY COLT MAGS...FLOOR PLATES MARKED 5.56MM, EXC CONDITION...EXTERIOR FINISH WEAR ONLY (AS FINISH CAME OFF IN YOUR HANDS BACK IN THE DAY)
$75 EACH
colt20magc.gif - 3288 Bytes
COLT 20 RND M16/AR15 FACTORY MAGS -- EARLY COLT MFG, RARELY AVAILABLE IN THIS FINE CONDITION.....HEAVILY COLT MARKED, BLACK FLOOR PLATES AND NICE CONDITIONED SILVERED FINISH BODY EXC+
$75 EACH
colt9mmloaderas
COLT 9MM SMG FACTORY MAGAZINE LOADER... MINT/NEW .... MAGAZINE NOT INCLUDED... EMAIL TO PURCHASE
$125
COLT 9MM SUBMACHINE GUN 32 RND HI CAP MAGAZINES. THESE ARE THE HARD TO FIND COLT 9MM M16/AR15 MAGS THAT FIT THE COLT R0635, COLT 9MM SPORTER OR THE ROCK RIVER 9MM SEMI CARBINE -- LIKE NEW/NEW .... EMAIL TO PURCHASE
$165 EACH
AVAILABLE
coltmodsupb.gif - 4287 Bytes COLT XM177E2 MODERATOR SUPPRESSOR GRENADE LAUNCHING WASHER. THESE ARE THE CORRECT COLT SPACER WASHERS FOR THE XM177E2 COMMANDO M16. THESE WASHERS ARE USED BEHIND THE MODERATOR SUPPRESSOR AND USED TO LAUNCH NATO TYPE RIFLE GRENADES FROM THIS RIFLE. ITEM SHOWN HERE WITH OUR COLT XM177E2 MODERATOR. A VERY RARE ACCESSORY AND THE FIRST TIME WE HAVE HAD SOME AVAILABLE. ONLY A FEW LEFT.
$225
COLT "NOS" PROTO TYPE "X" SERIAL NUMBER XM177E2 MODERATOR - FACTORY SUPPRESSOR -- WE HAVE DISCOVERED EARLY "X" PREFIX SERIAL NUMBERED, 100% BRAND NEW XM177E2 MODERATORS, DESIGNED FOR THE XM177E2 COMMANDOS... ALL HAVE COLT FACTORY INFO TOOL ROOM MARKED ON THEM, ALONG WITH THE "X" SERIAL NUMBER... MARKINGS READ: COLT MFG CO. INC., HARTFORD, CT, S/N X--- ... ULTRA RARE AND BRAND NEW ORIGINAL ITEM FROM THE COLT TOOL ROOM ... THIS IS AN NFA ITEM! EMAIL FOR PRICE
COLT "NOS" PROTO TYPE "X" SERIAL NUMBER XM177E2 MODERATOR - FACTORY SUPPRESSOR -- WE HAVE DISCOVERED EARLY "X" PREFIX SERIAL NUMBERED, 100% BRAND NEW XM177E2 MODERATORS, DESIGNED FOR THE XM177E2 COMMANDOS... ALL HAVE COLT FACTORY INFO TOOL ROOM MARKED ON THEM, ALONG WITH THE "X" SERIAL NUMBER... MARKINGS READ: COLT MFG CO. INC., HARTFORD, CT, S/N X--- ... ULTRA RARE AND BRAND NEW ORIGINAL ITEM FROM THE COLT TOOL ROOM ... THIS IS AN NFA ITEM! EMAIL FOR PRICE
coltscrewblockas
COLT 9mm SUBMACHINE DROP IN ONE PIECE MAGAZINE BLOCK--NO LONGER IN COLT PRODUCTION ---- THIS ONE PIECE MAG BLOCK IS A DROP IN INSTALLATION --- JUST PUSH THE BLOCK INTO THE MAG WELL OF YOUR .223 M16 AND TIGHTEN THE SET SCREW. THE SCREW PUSHES OUT ON TWO NON DAMAGING DETENTS TO SECURE BLOCK INTO MAG WELL, SO NO DAMAGE TO YOUR VERY EXPENSIVE .223 LOWERS. ORIGINAL WEAPONS MAG RELEASE OPERATES TO HOLD AND RELEASE MAG.... REMOVES AND REVERTS BACK TO STANDARD M16 MAGS IN SECONDS.... A SELDOM AVAILABLE ACCESSORY - ONLY A FEW AVAILABLE. ... EMAIL TO PURCHASE
$895
colt1pieceblocks
COLT FACTORY 9mm SUBMACHINE GUN MAG BLOCK -- LATEST STYLE COLT ONE PIECE MAG BLOCK BEING USED ON THE COLT 9mm SMG -- SIMILAR TO THE ONE PIECE DROP IN BLOCK, ONLY IT IS A ONE ROLL PIN TYPE... YOU SLIDE THIS BLOCK IN PLACE WITH THE TWO LITTLE SPRINGS, DRILL ONESMALL HOLE AND INSTALL ONE (1) ROLL PIN ... EMAIL TO PURCHASE
$395
colt2pieceblocks
COLT PARTS, COLT 9mm SMG TWO PIECE MAG BLOCK SETS.... THESE ARE THE COLT FACTORY 2 PIECE MAG BLOCK SETS NEEDED TO MAKE YOUR 5.56 INTO A 9mm AND TO BE ABLE TO USE THE FACTORY SMG MAG. THESE BLOCKS ARE FROM NEW L.E. RO635. THE 9mm MAG BLOCKS HAVE ALL BUT DRIED UP. WE HAVE A FEW SETS COMPLETE WITH SPRINGS AND ROLL PINS. ONLY A FEW SETS AVAILABLE .... EMAIL TO PURCHASE
$595
AVAILABLE
COLT 9mm SMG LOWER RECEIVER FIRE CONTROL PARTS SET. THIS PARTS INCLUDES HAMMER, TRIGGER, SELECTOR, SEAR, DISCONECTOR AND RELATED PINS,HARDENED STAINLESS PINS FOR HAMMER AND TRIGGER AND SPRINGS.
$575
COLT M16 5.56 LOWER RECEIVER FIRE CONTROL PARTS SET.... THIS PARTS SET INCLUDES HAMMER,TRIGGER,SELECTOR,SEAR,DISCONNECTOR AND RELATED PINS AND SPRINGS.
$695
COLT FACTORY MACHINE GUN M16A2 3 ROUND BURST FIRE CONTROL GROUP.... THIS IS A COLT FACTORY COMPLETE BURST GROUP AS USED IN THE COLT M16A2 BURST MACHINE GUN.... THE KIT IS COMPLETE WITH HAMMER/BURST CAM, TRIGGER, DISCONNECTORS, SEAR, SELECTOR, PINS AND SPRINGS... THESE KITS ARE GREAT FOR SPARES OR FOR THOSE WHO WANT TO HAVE THE 3 SHOT BURST OPTION AVAILABLE FOR THEIR M16 TYPE FIREARM .... KITS WILL WORK ON ALL COLT M16 TYPES, M16A1, M16A2 AND COLT 9MM SMG. A RARER SET OF NOT TOO COMMON COLT PARTS ... EMAIL TO PURCHASE
$575
M16 5.56 LOWER RECEIVER MIL SPEC/MILITARY FIRE CONTROL PARTS SET.... THIS PARTS SET INCLUDES HAMMER,TRIGGER,SELECTOR,SEAR,DISCONNECTOR AND RELATED PINS AND SPRINGS.
$395
commandcontrols.gif - 3691 Bytes
COLT ENHANCED COMMANDO/M4 FOUR (4) POSITION FIRE CONTROLS -- THESE ARE THE SUPER RARE 4 POSITION SAFE, SEMI, FULL AUTO AND THREE ROUND BURST FIRE CONTROLS THAT WERE USED ON THE LIMITED PRODUCTION COLT ENHANCED SPECIAL PRODUCTION MACHINE GUNS...THE SET INCLUDES ALL NEEDED COLT FACTORY ITEMS TO MAKE YOUR M16 FIRE IN BURST AS WELL AS SEMI AND FULL....RARE FACTORY ITEM .... EMAIL TO PURCHASE
$2,495


ACCESSORIES
HOME
SUPPRESSORS
AOW'S
AUTO WEAPONS


COPYRIGHT BY ARMAMENT SERVICES INTERNATIONAL, INC. ALL RIGHTS RESERVED CONTACT US